Product Description
Step 1: Install the back panel and the side panel on one side.
Step 2: Install the side panel on the other side.
Step 3: Then install the front panel.
Step 4: Install the blanking plate with transparent door panel.
Step 5: Finally install the bottom panel.
Step 6: Put on the cover and lock the latch.
Step 7: Overall display.
Product Dimensions : 11.5 x 9.8 x 23 inches; 13.3 Pounds
Item model number : Large Automatic Dog Feeder with Handle
Date First Available : September 14, 2023
Manufacturer : HHNIULI
ASIN : B0CJ2YZWPW
Country of Origin : China
No Noise: There are 2 silicone gaskets on the door, and the plastic door will not make any noise when it touches the metal container, the door protect the food from rain and sun, birds and bugs. sturdy, and coated to eliminate rust. the feeding door shut when not in use, but can be easily pushed open by even a small dog. This keeps birds and small animals out of the dog’s food. Sturdy and easy to use, easy to install
Lid with Latch on Both Sides: The top is equipped with two buckles, making it safer and not accidentally opened by lively dogs. Dogs will no longer open the top allowing the food to get wet & rot, Lid has an overhang, so rain would not get into the bin and spoil the food. It is very easy to load food into the feeder. The top panel opens and the opening is big enough to make pouring the food easy
Hanging Dog Feeder: It has two holes on the back that can be used to install the unit onto the fence. the stainless steel material is sturdy, good quality construction and is built to last
Save Time: To save the cost of boarding your pets or the hassle of finding a dog sitter, good quality construction and is built to last, made good for all elements of weather, Perfect food dispenser for Holland lop bunnies and ducks in the winter
Great Design: Keeps the food dry. Keeps your dog from spilling food all over the place. Sturdy and keeps rain and stuff out but easy for dogs to use
Z. Knaus –
Stellar.
Overall, this thing has been great. Here’s a couple notes how I’ve catered it to my situation and how that’s continuing to evolve:- Red lid: not so much. Painted it teal and it looks way better. Any color other than red would have been great too :D- Aside the from lid, I initially implemented this with no other modifications. I mounted it indoors and my dog intuitively understood how to use it. We got a puppy and he also intuitively understood how to use it… hence my additional modifications.- The springs on the door can sometime be not quite strong enough to fully close the door. This is generally ok because we’re inside but if this were outside I’d imagine it could lead to bugs getting in. A work-around may be to use an “automatic door closer”, which would need to be mounted to the inside of the feeder during installation. That would create additional pressure on the door to close (using springs). I picked one up for under 10 dollars and it seems to work well (though it does create additional force for the dog to push open the door so be mindful of this as well).- Now, with 2 dogs on different food, I needed some kind of access control system. If you’re not a complete loon that’s willing to dedicate hours of your life towards securing your dog’s food from each other, you can stop reading now. I’m implementing an access control system using this feeder combined with a gate latch and an arduino-controlled servo motor. Each dog will carry two very small/long lasting BLE beacons and when the right dog is in proximity of the right feeder, the gate latch (mounted on the inside) will open, allowing the dog to push the door open and get their own food. This was all fairly easy to implement with the design of this feeder. This design also lends itself to controlled feeding portions if that’s your jam and you’re handy with a 3D printer. There’s a narrow portion in the back where all of the food flows through. A 3D printed sleeve could be made and inserted into this area as a later upgrade that would portion the food and allow it to pass through/dispense.
Tom Pick –
I should’ve gotten this years ago!!
I got this for my three golden doodles. It is amazing. Made of very good material. All metal. I had to take the flapper door off because my dogs head was so big but it works like a charm. I should’ve gotten this years ago.!
Amazon Customer –
Mala calidad
Mala calidad, venia lamina doblada, faltan tornillos muy difícil armar no lo recomiendo muy caro para lo que es!!
R. Jones –
Great!
I got this to feed the wild animals around the house. It works well, but raccoons figured out right away how to get the top off. I’m looking for ideas on how to lock the top onto the bottom part.
Stacey –
Parts fit as designed.
Needs assembled but all parts are well matched. Well constructed & painted so looks nice.
Pat –
Good but…..
When it’s raining, the water gets into the container. Kind of hard to assemble. It’s nice and sturdy. Just make sure when you get this, place it somewhere where water or bugs can’t get in.
Savannah Heggen –
Easy & Effective
Some reviews said it was hard to assemble and that the holes didn’t align, I was skeptical to purchase this feeder but I’m so glad I did. It wasn’t hard to assemble at all. Time consuming but not hard. And if the pieces are installed correctly, the holes do align properly. It’s sturdy and exactly what I was looking for. I recommend this feeder if you’re in the market for one!
Troi Davis –
My dog didn’t use it
Idk easy to put together but my dog didn’t use it at all.